VXL EX solvent for ESM10 3DGence
€47.60*
Available in 7 days, delivery time 1-3 days
Accessories
Product number:
SW10887.1
Free Shipping
Worldwide
Free Returns
Within 30 Days
Purchase on invoice
Always available
Why should you use the Xioneer VXL EX instead of pure water to dissolve support material? Water soluble materials tend to break down quickly in the nozzle and can cause print head clogging. cause print head clogging. They also quickly absorb moisture from the from the surrounding air and are not compatible with many materials. For This is why the alkali-soluble ESM 10 filament is preferred in industry and preferred over conventional PVA, BVOH or PVOH. ESM10 has been specially developed to ensure the fast, easy and effective dissolution of our dissolution of our alkali-soluble support materials.
Safety aspects when using VXL EX: VXL EX has a pH value of pH value of approximately 11 when dissolved in water and is therefore classified as an irritant, similar to common household chemicals such as washing powder. When handling Xioneer VXL EX, it is recommended to always wear gloves and safety goggles to protect yourself. goggles to protect yourself.
Instructions for use: To achieve optimum dissolution results results, at least the same amount of VXL EX should be added to the solution as the as the amount of support material to be dissolved. The concentration of VXL EX in the dissolving bath should not be less than 2.5 %. It is possible to reuse the dissolving bath as long as the amount of dissolved support material does not exceed the amount of VXL EX added. Please note, however, that the dissolving time may increase noticeably after saturation and it is advisable to prepare a fresh solution. solution. If the solution is exhausted, it is recommended to add 5-10 g of citric acid per liter to liter to neutralize the pH value. The exhausted solution can usually be disposed of down the household drain, after consultation with your with your local sewage treatment plant. Before disposal, the solution can be neutralized with neutralized with citric acid.
Environmental aspects: VXL EX is non-corrosive and safe to use. application. When mixed with water, it produces a mildly alkaline solution for dissolving solution to dissolve support material printed with VXL filament. Normally, the exhausted solution can be disposed of in household waste water, after prior clarification with your local sewage treatment plant. Before disposal the solution can be neutralized with citric acid.
Login
VXL EX solvent for ESM10 3DGence
Why should you use the Xioneer VXL EX instead of pure
water to dissolve support material? Water soluble
materials tend to break down quickly in the nozzle and can cause print head clogging.
cause print head clogging. They also quickly absorb moisture from the
from the surrounding air and are not compatible with many materials. For
This is why the alkali-soluble ESM 10 filament is preferred in industry and
preferred over conventional PVA, BVOH or PVOH. ESM10 has been specially developed to ensure the fast, easy and effective dissolution of our
dissolution of our alkali-soluble support materials.
Safety aspects when using VXL EX: VXL EX has a pH value of
pH value of approximately 11 when dissolved in water and is therefore classified as an
irritant, similar to common household chemicals such as washing powder.
When handling Xioneer VXL EX, it is recommended to always wear gloves and safety goggles to protect yourself.
goggles to protect yourself.
Instructions for use: To achieve optimum dissolution results
results, at least the same amount of VXL EX should be added to the solution as the
as the amount of support material to be dissolved. The concentration of VXL
EX in the dissolving bath should not be less than 2.5 %. It is possible to reuse the dissolving bath
as long as the amount of dissolved support material does not exceed the amount of
VXL EX added. Please note, however, that the dissolving time
may increase noticeably after saturation and it is advisable to prepare a fresh solution.
solution. If the solution is exhausted, it is recommended to add 5-10 g of citric acid per liter to
liter to neutralize the pH value. The exhausted solution
can usually be disposed of down the household drain, after consultation with your
with your local sewage treatment plant. Before disposal, the solution can be neutralized with
neutralized with citric acid.
Environmental aspects: VXL EX is non-corrosive and safe to use.
application. When mixed with water, it produces a mildly alkaline solution for dissolving
solution to dissolve support material printed with VXL filament.
Normally, the exhausted solution can be disposed of in household waste water,
after prior clarification with your local sewage treatment plant. Before disposal
the solution can be neutralized with citric acid.
€47.60*
3DGence Druckmodul M280
3DGence M280 Standard Druckmodul
Das M280 ist das Basis Druckmodul für den 3DGence Industry F420 und F350 3D-Drucker. Mit diesem Druckmodul können Standard- und Support-Materialien verarbeitet werden.
M280 Materialübersicht
✔ PLA✔ ABS✔ ASA✔ PA✔ PET-G✔ TPU✔ TPE✔ HIPS✔ BVOH✔ PVA✔ EMS-10
In dem 3DGence Slicer werden für die jeweiligen Materialgruppen entsprechende Druckprofile zur Verfügung gestellt.
€3,927.00*
3DGence F420/F350 Signal Tower
Signal Tower for the 3DGence Industry F420/F350
The Signal Tower shows the current status of the 3D printer by means of a light signal. The Signal Tower belongs to the common industry standard and is compatible with the 3DGence Industry F350 and F420 3D printer.
€418.45*
3DGence Double Bauraum-Abdeckung
Gehäuse für 3DGence DOUBLE 3D-Drucker sorgt für eine stabile Temperatur während des Druckvorgangs. Envolsure erhöht die Qualität und Maßgenauigkeit der Drucke.
€235.95*
3DGence PEEK AERO Natural Filament
PEEK™ Aero from 3DGence is one of the highest performing thermoplastics available for
available for additive manufacturing. A key feature of the polymer is its
compliance with AS9100 certification for aerospace applications.
Description of the PEEK™ Aero Filament
Certified filaments play a key role in industrial
industrial 3D printing, especially in these areas where safety is paramount.
is paramount. PEEK™ Aero belongs to the group of high-performance polymers
- filaments that can withstand the most demanding environments. It
characterized by the highest heat resistance (high-temperature applications up to
260 °C), chemical resistance, high tensile strength and excellent impact resistance.
impact resistance. Thanks to its flame retardancy (UL94 V-0), its low weight and the
weight and AS9100 Aerospace certification, the material is used in the aerospace and
the aerospace and defense industries.
The most important advantages of PEEK AERO
- The most important advantages of PEEK™ Aero certified according to
AS9100,
- Excellent heat resistance:
High temperature applications up to 260°C,
- high chemical resistance and tensile strength.
PEEK™ Aero industrial application in 3D printing
Due to its properties and certifications
PEEK™ Aero can be used for end parts in the aerospace and defense sectors.
defense sector can be used. Some customers print machine and
equipment parts with PEEK™ Aero, others find it useful for sliding and
sliding applications. Due to its high heat resistance (up to 260 °C), it is a suitable
it is a suitable filament for prints exposed to extreme temperatures.
are exposed to.
PEEK™ Aero: Good to know
3D printing with PEEK™ Aero delivers exceptional,
durable results, but requires professional equipment to achieve the best
achieve the best results. With our INDUSTRY™ F421, which offers
high-speed printing and a large chamber volume, you can take advantage of all the
possibilities of additive manufacturing with PEEK™ Aero. It is available with the
compatible with the soluble support material ESM-10.
€565.00*
3DGence Precision Hotend 0,3mm für den 3DGence One 3D-Drucker
3DGence One 3D Drucker Precision Hotend
Zur Verwendung in Kombination mit dem 3DGence One 3D-Drucker.
Durchmesser der Düse: 0,3 mm
Das patentierte "Pusch" Wechselsystem ermöglicht Ihnen den schnellen Austausch des Hotends. Hierfür benötigen Sie kein Werkzeug!
Das Precision Hotend ist mit drei verschiedenen Durchmessern erhältlich:
0,3 mm
0,4 mm
0,5 mm
€141.98*
3DGence Industry F340 Druckmodul Pro
3DGence Pro Druckmodul für Standard-Materialien
Das Pro Druckmodul für den 3DGence Industry F340, lässt sich auf eine Temperatur von bis zu 265°C erhitzen und eigenet sich somit optimal für alle Standard 3D-Druck-Materialien. Das Druckmodul ist mit zwei 0.4mm Düsen aus gehärtetem Stahl ausgestattet.
Für folgende Materialien geeignet
✔ PLA✔ ABS✔ PET✔ PET-G✔ ASA✔ PP✔ NYLON✔ TPU✔ HIPS✔ BVOH✔ ESM-10
€2,379.00*
3DGence Druckmodul M500+
3DGence M500 PEEK Druckmodul
Das M500 ist eines der austauschbaren Module, das eine Extrusionstemperatur von bis zu 500 °C erreichen kann. Diese hohe Temperatur in Kombination mit der beheizten Kammer des Druckers ermöglicht das Drucken von Hochleistungspolymeren wie PEEK oder PEKK auf Industry F350 und F420. Zusätzlich können für diese Filamente speziellen Stützmaterialien wie das lösliche ESM-10 verwendet werden.
In dem 3DGence Slicer werden für die jeweiligen Materialgruppen entsprechende Druckprofile zur Verfügung gestellt.
€6,545.00*
3DGence Precision Hotend 0,4mm für den 3DGence One 3D-Drucker
3DGence One 3D Drucker Precision Hotend
Zur Verwendung in Kombination mit dem 3DGence One 3D-Drucker.
Durchmesser der Düse: 0,4mm
Das patentierte "Pusch" Wechselsystem ermöglicht Ihnen den schnellen Austausch des Hotends. Hierfür benötigen Sie kein Werkzeug!
Das Precision Hotend ist mit drei verschiedenen Durchmessern erhältlich:
0,3 mm
0,4 mm
0,5 mm
€159.98*
3DGence Industry F340 Druckmodul HT
3DGence HT Druckmodul erhitzbar bis 340°C
Das HT Druckmodul für den 3DGence Industry F340, lässt sich auf eine Temperatur von bis zu 340°C erhitzen. Das Druckmodul ist mit zwei 0.4mm Düsen aus gehärtetem Stahl ausgestattet.
Für folgende Materialien geeignet
✔ PC✔ PC-ABS✔ PC-ESD✔ ABS (als Support)
€4,164.00*
3DGence Industry F340 Print Module HF
3DGence HF Print Module for Printing with Abrasive Materials
With the HF print module for the 3DGence Industry F340 3D printer, you can easily process abrasive such as carbon fiber or glass fiber reinforced filaments.
The print module is equipped with two 0.6mm hardened steel nozzles (Has 2 print heads).
Suitable for the following materials
✔ ABS✔ ASA✔ PA-CF✔ PA6-GF✔ ABS-CF✔ HIPS✔ ESM-10
€2,969.00*
3DGence Precision Hotend 0,5mm für den 3DGence One 3D-Drucker
3DGence One 3D Drucker Precision Hotend
Zur Verwendung in Kombination mit dem 3DGence One 3D-Drucker.
Durchmesser der Düse: 0,5mm
Das patentierte "Pusch" Wechselsystem ermöglicht Ihnen den schnellen Austausch des Hotends. Hierfür benötigen Sie kein Werkzeug!
Das Precision Hotend ist mit drei verschiedenen Durchmessern erhältlich:
0,3 mm
0,4 mm
0,5 mm
€159.98*
3DGence One Bauraumabdeckung
Die Passende Bauraumabdeckung für den 3DGence One 3D-Drucker.
Mit dieser Abdeckung lassen sich Materialien wie zum Beispiel ABS oder PP noch leichter verarbeiten.
€173.95*
3DGence Industry F340 Druckmodul HTmax
3DGence HTmax Druckmodul für den PEEK 3D-Druck
Mit dem HTmax Druckmodul für den 3DGence Industry F340 3D-Drucker, können Sie Materialien bis zu einer Temperatur von 500 °C verarbeiten. Häufig wird dieses Modul für die verarbeitung von PEEK eingesetzt.
Das Druckmodul ist mit zwei 0.4mm Düsen aus gehärtetem Stahl ausgestattet.
Für folgende Materialien geeignet
✔ PEEK✔ PEKK✔ ESM-10
€5,354.00*
3DGence F340 Stand Basic Unterschrank
3DGence Stand Basic - Unterschrank für den 3DGence F340 3D-Drucker
Der Basic Stand wurde speziell für den 3DGence F340 entwickelt. In kombination mit dem Unterschrank bietet das System die perfekte Arbeitshöhe. Zusätlich bietet er Ihnen genügend Stauraum für Filament, Werkzeug und Zubehör.
€2,057.00*
3DGence Laboratory Dryer Ofen für PEEK
3DGence Laboratory Dryer Oven - zum Tempern/Härten von PEEK
Der 3DGence Laboratory Dryer Ofen ist ein speziell entwickelter Ofen zum Tempern Ihrer PEEK-Drucke. Zusätzlich dient der Ofen zum trocknen Ihrer Filamente vor dem Drucken.
Mit einem Fassungsvermögen von 56 Litern und einer Betriebstemperatur von 300 ° C ist es die perfekte Lösung für all diejenigen die PEEK-Filamente verarbeiten möchten.
Von amorph bis teilkristallin Aufgrund des schnellen Abkühlens während des Druckvorgangs sind im PEEK-Filament gedruckte Teile amorph und spröder. Der Laborofen kombiniert programmierbare Wärmekurven und forcierte Luftzirkulation, sodass die spröden Teile teilkristallin sind und somit wieder die mechanischen Eigenschaften von PEEK erhalten. Durch Tempern Ihrer Abzüge in einem Metallbehälter wächst die Steifheit. Das Schrumpfen des Drucks wird durch die Verwendung von Quarzsand minimiert. Dieser Sand kann nach dem Abkühlen wiederverwendet werden.
Optimiert man den Vorgang, kann der Ofen auch zum trocknen Ihrer Filamente vor dem Druck verwendet werden. So können Sie Ihre Ergebnisse noch weiter optimieren.
Der Workflow
€2,094.95*
3DGence Support Dissolving System
3DGence Support Dissolving System - Auswaschstation für Stützmaterial
Mit dem 3DGence SDS (Support Dissolving System) lösen Sie Ihre Stützstrukturen schnell und kontrolliert . Die SDS Auswaschstation ist die ideale Ergänzung für die 3DGence Industry 3D-Drucker.
€5,159.00*
3DGence ABS filament
3DGence
ABS
ABS
is one of the most popular thermoplastics, regardless of the manufacturing
manufacturing process used.
ABS
is a machinable material - technological holes and even threads can be produced on the printed
threads can be produced on the printed model.
A
relatively high material hardness results in high scratch resistance. ABS also has
basic resistance to acids, bases and alcohols.
It
can be used for printing models that are used in the temperature range of
-20 - 80°C. ABS is recyclable. The surface of models made from ABS
models made of ABS is matt, whereby the colors are less saturated than models made of
PLA models.
Application:
Housing
of electronic devices, household appliances
car parts
(crossbars, buttons, interior fittings, wheel arches)
Sports equipment,
Elements of firearms, furniture components
3DGence
ABS can be printed using the soluble ESM-10 support material.
€43.00*
3DGence Sabic LEXAN™ EXL AMHI240F filament
LEXAN™ EXL AMHI240F is an advanced version of LEXAN
EXL polycarbonate (PC) with outstanding properties such as high strength, toughness and impact resistance,
toughness and impact resistance. The manufacturer emphasizes the improved
Izod notched impact strength compared to conventional polycarbonates at room temperature and
room temperature and very low temperatures. This filament
This filament combines first-class mechanical properties with easier
processing compared to other PC thermoplastics. It is important to
note that LEXAN™ EXL AMHI240F complies with the UL94 V-0 flammability standard at 3.0 mm
thickness in horizontal (XY) and vertical (XZ) orientation. The
heat dissipation temperature of this copolymer is 140 degrees Celsius. LEXAN™
EXL AMHI240F is very sensitive to moisture. It is therefore
storage and drying conditions must be taken into account in order to achieve
achieve high-quality printing results.
The main advantages of Sabic LEXAN™ EXL AMHI240F
- High toughness and impact resistance
- Non-flammability: UL94 V-0 certification
Industrial applications for Sabic LEXAN™ EXL AMHI240F
Due to its high formability, strength and toughness, this high-performance
this high-performance material is suitable for various industrial
industrial applications, including demanding industries such as automotive, consumer
consumer electronics, aerospace and rail transportation.
Things to know about Sabic LEXAN™ EXL AMHI240F
To achieve optimal results when 3D printing with LEXAN™ EXL AMHI240F
certain printing conditions must be met. These
conditions can be guaranteed by industrial 3D printers.
Customer reviews confirm that LEXAN™ EXL AMHI240F works well with our INDUSTRY
F421, INDUSTRY F420 and INDUSTRY F350 products. Due to
its sensitivity to moisture, appropriate storage and drying conditions are
drying conditions are essential. Regardless of your industry
our Material Management System (MMS) enables easier, faster and more effective
more effective 3D printing with LEXAN™ EXL AMHI240F.
€184.00*
3DGence ABS filament
3DGence
ABS
ABS
is one of the most popular thermoplastics, regardless of the manufacturing
manufacturing process used.
ABS
is a machinable material - technological holes and even threads can be produced on the printed
threads can be produced on the printed model.
A
relatively high material hardness results in high scratch resistance. ABS also has
basic resistance to acids, bases and alcohols.
It
can be used for printing models that are used in the temperature range of
-20 - 80°C. ABS is recyclable. The surface of models made from ABS
models made of ABS is matt, whereby the colors are less saturated than models made of
PLA models.
Application:
Housing
of electronic devices, household appliances
car parts
(crossbars, buttons, interior fittings, wheel arches)
Sports equipment,
Elements of firearms, furniture components
3DGence
ABS can be printed using the soluble ESM-10 support material.
€43.00*
3DGence ABS filament
3DGence
ABS
ABS
is one of the most popular thermoplastics, regardless of the manufacturing
manufacturing process used.
ABS
is a machinable material - technological holes and even threads can be produced on the printed
threads can be produced on the printed model.
A
relatively high material hardness results in high scratch resistance. ABS also has
basic resistance to acids, bases and alcohols.
It
can be used for printing models that are used in the temperature range of
-20 - 80°C. ABS is recyclable. The surface of models made from ABS
models made of ABS is matt, whereby the colors are less saturated than models made of
PLA models.
Application:
Housing
of electronic devices, household appliances
car parts
(crossbars, buttons, interior fittings, wheel arches)
Sports equipment,
Elements of firearms, furniture components
3DGence
ABS can be printed using the soluble ESM-10 support material.
€43.00*
3DGence ABS filament
3DGence
ABS
ABS
is one of the most popular thermoplastics, regardless of the manufacturing
manufacturing process used.
ABS
is a machinable material - technological holes and even threads can be produced on the printed
threads can be produced on the printed model.
A
relatively high material hardness results in high scratch resistance. ABS also has
basic resistance to acids, bases and alcohols.
It
can be used for printing models that are used in the temperature range of
-20 - 80°C. ABS is recyclable. The surface of models made from ABS
models made of ABS is matt, whereby the colors are less saturated than models made of
PLA models.
Application:
Housing
of electronic devices, household appliances
car parts
(crossbars, buttons, interior fittings, wheel arches)
Sports equipment,
Elements of firearms, furniture components
3DGence
ABS can be printed using the soluble ESM-10 support material.
€43.00*
