Flashforge Filament
The original Flashforge filament gives you the opportunity to get the best out of your Flashforge 3D printer. The diverse and high-quality filament range offers you many possibilities.
FlashForge PLA Filament 1,75mm - 1000g
FlashForge PLA Filament in verschiedenen Farben
Das original Flashforge PLA Filament bietet Ihnen das optimale Druckerlebnis für Ihren Flashforge 3D-Drucker. Das PLA Filament gibt es in verschiedenen Farben.
Bitte beachten: Die Filamentspulenhalter im Flashforge Dreamer und Adventurer 3 sind für die 0,5/0,6 kg Filamentrollen ausgelegt. Für die Verwendung dieser 1,0 kg Spulen, müssen Sie einen externen Filamentrollenhalter verwenden. Entsprechende kostenlose Vorlagen für einen sollchen Halter, finden Sie zum Beispiel auf thingiverse.com .
€20.45*
FlashForge ABS Filament 1,75mm - 1000g
FlashForge ABS Filament in verschiedenen Farben
Das original Flashforge ABS Filament bietet Ihnen das optimale Druckerlebnis für Ihren Flashforge 3D-Drucker. Das ABS Filament gibt es in verschiedenen Farben.
Eigenschaften
✔ Schlagfest✔ Langlebig✔ Starr
Bitte beachten: Die Filamentspulenhalter im Flashforge Dreamer und Adventurer 3 sind für die 0,5/0,6 kg Filamentrollen ausgelegt. Für die Verwendung dieser 1,0 kg Spulen, müssen Sie einen externen Filamentrollenhalter verwenden. Entsprechende kostenlose Vorlagen für einen sollchen Halter, finden Sie zum Beispiel auf thingiverse.com .
€20.45*
Flashforge PVA Filament 1,75mm - 500g
PVA Filament von Flashforge
Das PVA Filament von Flashforge, eignet sich ideal zum druck von wasserlöslichen Stützstrukturen. Am besten funktioniert das PVA Filament in kombination mit dem Flashforge PLA Filament. Achten Sie darauf das PVA Filament immer trocken zu lagern, da dies sehr schnell feuchtigkeit aufnimmt.
Bitte beachten: Die Filamentspulenhalter im Flashforge Dreamer und Adventurer 3 sind für die 0,5/0,6 kg Filamentrollen ausgelegt. Für die Verwendung dieser 1,0 kg Spulen, müssen Sie einen externen Filamentrollenhalter verwenden. Entsprechende kostenlose Vorlagen für einen sollchen Halter, finden Sie zum Beispiel auf thingiverse.com .
€48.45*
Flashforge Elastic TPU 95A Filament 1,75mm - 500g
Elastic TPU95A - flexibles Filament von Flashforge
Flashforge Elastic TPU 95A ist ein thermoplastisches Polyurethan, welcher sich aufgrund seiner guten Fließeigenschaften und seiner guten Schichthaftung sehr leicht verarbeiten lässt. Das Filament hat eine Shorehärte von 95A.
Es wird empfohlen das Filament bei einer Temperatur von 170 °C - 220 °C zu verarbeiten.
€22.35*
Flashforge Flexible 85A Filament
Flashforge Flexible 85A is a high-quality, flexible filament that is
filament that is ideal for 3D printing projects that require flexibility and elasticity.
and elasticity are required. With a Shore hardness of 85A, it offers a
a balanced combination of flexibility and stability. This filament
is ideal for printing seals, shock absorbers,
rubber parts and other applications where movement and deformation are required.
are required.
Thanks to its excellent layer adhesion and print quality
the Flashforge Flexible 85A enables precise and reliable results. It
compatible with most common 3D printers that support flexible materials.
that support flexible materials. The high wear resistance and resistance to
UV radiation make it an excellent choice for use in various environments.
various environments.
With Flashforge Flexible 85A you can realize creative and
functional projects that require flexibility. It is easy to
handling and offers reliable performance, making it a popular choice among 3D printing
choice among 3D printing enthusiasts and professionals.
€36.00*
Flashforge ASA Filament
The Flashforge ASA filament is characterized by various properties, including
properties, including:
-
High stiffness, toughness and strength.-
Excellent scratch resistance.-
Outstanding resistance to extreme temperatures
temperatures and weathering.-
Very good UV resistance.-
Excellent processing properties.-
Ideal for use in technical components.
If you require further information on this material
or have any further questions, please do not hesitate to contact us.
Print settings:
Recommended printing temperature: 230-250 °CRecommended printing speed: 60-90 mm/sBuild platform heating: Yes, set to 100-110 °C.Do not activate the fan.Ensure that there is sufficient ventilation (in the room).
room) is provided.
€23.90*
Flashforge PETG filament
Flashforge PETG filament is characterized by its high impact resistance and excellent mechanical properties. It is ideal for the production of parts that come into contact with food.Properties
- practically odorless
- high resistance
- Very good mechanical properties
- good temperature and weather resistance
- food-safe
- suitable for transparent print models
- low warpage
- very good thermal processability
Printing recommendations
- Printing temperature: 220-240 °C
- Printing speed: 60-90 mm/s
- Heating the build platform: yes (80-100 °C)
€20.00*
Flashforge PLA-CF (Carbon) filament
The Flashforge PLA-CF (carbon) filament is available on a 1000 g spool in a diameter of 1.75 mm.
available. It is characterized by its content of about 10% carbon fibres
which makes it stiffer than conventional PLA filaments. Properties:
This
material combines the advantages of PLA with improved mechanical
properties.
It is
odorless and therefore pleasant to work with.It has a
high surface hardness, rigidity and tensile strength.It has
good UV resistance, which makes it suitable for outdoor use.It shows
moderate resistance to temperature and weathering.Recommended
Printing temperature: 200-230 °C.Recommended printing speed
printing speed: 60-90 mm/s.It is helpful
helpful to heat the build platform to 40-50 °C, but not essential.
necessary.It is recommended
recommended to switch on the fan during the printing process.
Printing recommendations:
Please
follow these recommendations to achieve high quality printing
print results with this material. If you have any further questions or
information, please do not hesitate to contact us.
€49.00*
Flashforge PETG-CF (carbon) filament
Flashforge PETG-CF (Carbon) filament is based on the popular PETG filament and is reinforced with 10% carbon fibers, making it much more resistant, impact-resistant and robust than conventional PETG filament. It is therefore ideal for prototypes and components that have to withstand heavy loads.PropertiesThis carbon fiber-reinforced PETG filament is virtually odorless.It is highly resistant and offers very good mechanical properties.
It has good temperature and weathering resistance.
It is food-safe and therefore safe for contact with food.
It is particularly suitable for transparent print models.
This material tends to warp slightly during the printing process.
It enables very good thermal processability. Printing recommendationsRecommended printing temperature: 220-240 °C.
Recommended printing speed: 60-90 mm/s.
It is advisable to heat the build platform to 80-100 °C. These recommendations should be followed to achieve high quality printing results with this carbon fiber reinforced PETG filament. If you have any further questions or require more information, please do not hesitate to contact us.
€49.90*
Flashforge PA-CF
Flashforge PA-CF filament is a high-performance nylon-based material
nylon-based material with 20% embedded carbon fibers, which makes printed objects
objects extremely robust and heat-resistant. These unique
properties make the filament particularly suitable for industrial prototyping.
prototype construction.
With regard to abrasion resistance, it should be noted that the
standard nozzles used in the Creator 3 and Guider 2/2s,
are not suitable for printing this fiber-filled filament. The
comparatively high concentration of extremely hard carbon fibers can have an
have an abrasive effect on conventional brass nozzles. We therefore strongly recommend
the use of nozzles made of stainless steel or other hardened alloys.
alloys. It should also be noted that other components in the print head,
such as the PTFE tubes, are subject to faster wear and therefore need to be
therefore need to be replaced sooner.
The recommended extruder temperature is in the range of 195°C
to 230°C. It is important to pay particular attention to a solid adhesion of the first layer
of the material.
€81.90*
New
Flashforge PLA Matt Filament
Das Flashforge PLA Matt Filament Schwarz bietet eine
einfache Verarbeitung und eine matte, nicht-reflektierende Oberfläche. Es ist
geruchsneutral, lebensmittelecht und wird aus ökologisch erneuerbarem Material
hergestellt. Fertige Modelle lassen sich problemlos vom Druckbett lösen und gut
nachbearbeiten.
Anwendungsbereiche umfassen:
Medizinische AnwendungenSpielzeugFiguren/DekoelementeEssensverpackungenHygieneprodukte
Eigenschaften von PLA Matt Filament Schwarz:
Hochwertiges PLA-Filament für FDM/FFF-DruckverfahrenEinfach zu verarbeitenGeringe FeuchtigkeitsaufnahmeLebensmittelechtGute Nachbearbeitungsmöglichkeiten
Empfohlene Druckeinstellungen:
Drucktemperatur: 190°C - 220°CDruckbetttemperatur: 25°C - 60°CIdeal mit DruckbettunterlageDruckgeschwindigkeit: 40 - 60 mm/s
€22.45*
