E3D Düsen für 3D Drucker kaufen

E3D Nozzle X gehärtete Düse auf Werkzeugstahlbasis Nozzle X von E3D ist eine unglaublich robuste und abriebfeste 3D-Drucker Düse auf Basis von gehärtetem Werkzeugstahl. Um auch hohen Temperaturen von bis zu 500 °C stand zu halten, werden die Nozzle X Düsen mit Nickel veredelt und anschließend mit einer WS2-Beschichtung versehen. Mit den Nozzle X Düsen von E3D, können Sie problemfrei alle Filamente von PLA bis hin zu PEEK verarbeiten. Eigenschaften der Nozzle X✔ Hohe Hitzebeständigkeit (Temperaturen bis 500 °C möglich) ✔ Sehr Abriebfest dank des Nickelbeschichteten Werkzeugstahls ✔ Anti-Haftbeschichtung - Nanocoating aus polyphobem WS2 Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel.  Antihaftbeschichtung:

E3D Volcano Nozzle aus Messing/Brass Die Volcano Nozzles von E3D sind speziell für den Volcano Heat Block entwickelt. Die Volcano Messingdüsen mit der charakteristischen Geometrie von E3D haben optimale thermische Eigenschaften für den alltäglichen Druck und bieten gleichzeit glatte Schichten für nicht-abrasive Standardanwendungen. Ausgelegt sind die Düsen für eine maximale Temperatur von 300 °C.  Eigenschaften der Volcano Messing Düsen ✔ Hohe Hitzebeständigkeit (Temperaturen bis 300 °C möglich)✔ Kurze Aufheizzeiten   Bitte beachten: Die Volcano Düsen sind nicht kompatibel mit den Heizblöcken V6, SuperVolcano oder Cyclops.

E3D V6 Brass Nozzeln Die V6 Brass oder Messing Düsen sind unteranderem für die E3D V6 Heizblöcke konzepiert. Die E3D V6 Messing Düsen gibt es in verschiedenen Düsendurchmessern von 0.15mm bis 0.80mm.   Die V6 Messing-Nozzle mit den charakteristischen Merkmalen von E3D verfügen über perfekte thermische Eigenschaften die für den alltäglichen Druck erforderlich sind. Sie sorgen für glatte Schichten und eine guten Zwischenschichthaftung. Ausgelegt sind die Düsen für eine maximale Temperatur von 300°C.  Eigenschaften der V6 Messing Düsen ✔ Standard-Düse mit Temperaturen bis 300°C ✔ Sehr glatte Oberflächen sind möglich✔ Ideale thermische Eigenschaften   Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel. 

E3D Volcano Nozzle X hardened nozzle based on tool steel Volcano Nozzle X from E3D is an incredibly robust and abrasion-resistant 3D printer nozzle based on hardened tool steel. In order to withstand high temperatures of up to 500 °C, the Volcano Nozzle X nozzles are refined with nickel and then coated with a WS2 coating. With the Volcano Nozzle X nozzles from E3D, you can process all filaments from PLA to PEEK without any problems. Further information on the warranty and cleaning of the Nozzle X nozzles can be found here. Features of the Nozzle X ✔ High heat resistance (temperatures up to 500 °C possible)✔ Very abrasion-resistant thanks to the nickel-coated tool steel✔ Non-stick coating - nanocoating made of polyphobic WS2 Please note: The Volcano nozzles are not compatible with the V6, SuperVolcano or Cyclops heating blocks.

Revo Düsen von E3D Wechseln Sie die Düsen Ihres 3D-Druckers in weniger als 60 Sekunden ohne Werkzeug! Experementieren mit Düsendurchmessern Da das Austauschen von Düsen so einfach ist, können Sie problemfrei mit verschiedenen Düsengrößen experimentieren. Wechseln Sie in kürzester Zeit von ultrafeinen zu ultradicken Extrusionsbreiten. Nutzung ohne Probleme Jede Revo Nozzle besteht aus einer vormontierten Düse und einem HeatBreak in einer einzigen Einheit, so gibt es keine Probleme mit der Montage.Verabschieden Sie sich von frustrierenden HotEnd-Lecks und profitieren Sie von erfolgreichen Druckvorgängen. Schnelle Erkennung Dank der farbcodierten Silikonsocke können Sie die Düsengrößen auf einen Blick erkennen 0,25 mm (Gelb), 0,4 mm (Rot), 0,6 mm (Blau) und 0,8 (Grün) mm. Zusätzlich ist auf jeder Revo Nozzle die Größe mit leicht lesbaren Zahlen eingraviert. Bitte beachten Sie: - Revo-Düsen sind nicht mit Heizblöcken des Typs V6 kompatibel. - Möglicherweise müssen Sie Ihren Z-Offset anpassen, wenn Sie die Düsen wechseln.

Revolutionary performance with the RapidChange Revo™ ObXidian nozzle!This nozzle sets new standards in wear resistance and hardness that are orders of magnitude superior to other E3D nozzles. ObXidian is not only several orders of magnitude harder than the Nozzle X, but also compared to any other hardened steel nozzle. This is achieved through the innovative combination of a tool steel insert with an E3DLC™ coating. The specially formulated coating not only gives the nozzle exceptional hardness, but also non-stick properties. The result? Significantly less plastic accumulates around the nozzle.The freedom to experiment is paramount. Thanks to the uncomplicated nozzle exchange, you can easily try out different nozzles for different applications. Switch from your Revo brass nozzles to ObXidian to experience fiber-rich prints and let your creativity run wild.Installation is designed to be frustration-free. Each Revo Nozzle consists of a pre-assembled nozzle and a HeatBreak in one unit. This means no dangerous hot tightening and no possibility of incorrect assembly. Say goodbye to frustrating hot end leaks - experience reliable 3D printing!Quick identification of nozzle sizes is made possible by color-coded silicone socks. In addition, the size is engraved on each Revo Nozzle with easy-to-read numbers. So you don't have to remember any complicated markings!Please note: Revo™ nozzles are not compatible with V6-type HeaterBlocks. When changing the nozzles, it may be necessary to adjust the Z offset. The use of abrasives with 0.25 mm nozzles is not recommended. The risk of nozzle clogging increases considerably due to possible larger particle sizes, especially with fibers. Nevertheless, 0.25 mm nozzles benefit from the low adhesion properties of the E3DLC coating.

RapidChange Revo™ tape nozzle These belt nozzles have been specially developed for belt printing and have a longer reach to be able to print with Revo HotEnds at an angle of 45°. printing with Revo HotEnds. You can change the nozzles in less than 60 seconds, without tools or hot clamps. Just use your fingers! Free experimentation Revo Belt Nozzles are available in three different sizes - 0.4 mm, 0.6 mm and 0.8 mm. Because the nozzles are so easy to change, you can experiment you can experiment with nozzle sizes that you may not have used before. used before. Set up your 3D printer in no time for ultra-fine or ultra-thick extrusion widths. Print large objects in less time time or tiny objects with high resolution. Frustration free Each Revo Nozzle consists of a pre-assembled nozzle and a HeatBreak a HeatBreak in one unit, so there is no dangerous hot tightening and no risk of and no risk of incorrect assembly. Say goodbye to frustrating hot end leaks and enjoy reliable 3D printing! Quick identification Thanks to the color-coded silicone sock, the nozzle sizes can be at a glance. In addition, the size of each Revo Nozzle is engraved with easily engraved with easy-to-read numbers, so you don't have to learn confusing identification markings!

E3D SuperVolcano Nozzle aus Messing/Brass Super Volcano Nozzles von E3D sind speziell für den SuperVolcano Heat Block entwickelt. Mit dicken bis hin zu superdicken Schichten können Sie in kürzester Zeit noch stärkere, noch schnellere und noch größere Drucke erstellen. Die SuperVolcano Messingdüsen mit der charakteristischen Geometrie von E3D haben optimale thermische Eigenschaften für den alltäglichen Druck und bieten gleichzeit glatte Schichten für nicht-abrasive Standardanwendungen. Ausgelegt sind die Düsen für eine maximale Temperatur von 300 °C.  Eigenschaften der SuperVolcano Messing Düsen ✔ Hohe Hitzebeständigkeit (Temperaturen bis 300 °C möglich)✔ In sehr großen Druchmessern erhältlich   Bitte beachten: Die SuperVolcano Düsen sind nicht kompatibel mit den Heizblöcken V6, SuperVolcano oder Cyclops.

Revo Nozzle Triple Sock Pack from E3D The socks are clamped to the Revo HeaterCore on one side and connected to any Revo-compatible side on the other (suitable for Revo Micro, Revo Six and Revo Hemera). The spring keeps the HeaterCore firmly connected to the cold side and at the same time presses it into the nozzle to improve thermal conductivity. Features ✔ Keeps the HeaterCore in good thermal contact with a Revo Nozzle✔ Effective in attaching the Revo HeaterCore to the heat sink✔ Compatible with Revo Micro, Revo Six, and Revo Hemera

E3D V6 Hardened Steel Nozzeln Die V6 Nozzeln von E3D aus Hardened Steel wurden entwickelt, um den Abrieb durch abrasive Materialien / Filament zu verhindern. Kohlefasern sind besonders abrasiv und ein bekanntes Beispiel, für den Einsatz von verstärkten Düsen. Gehärtete Stahldüsen sind nahezu verschleißfrei und sollten so lange halten wie Ihr 3D-Drucker. Gehärtete Stahldüsen sind auch sehr widerstandsfähig gegen Beschädigungen. Mit einer Drahtbürste können Sie eine gehärtete Düse reinigen, ohne sie zu beschädigen. Gehärteter Stahl ist etwas weniger wärmeleitfähig als Messing, aber in verschiedenen Testvorgängen hat dies keine spürbaren Auswirkungen auf die tatsächliche Leistung und Druckgeschwindigkeit gehabt. Wenn Sie bei der Umstellung von Messing oder Kupfer eine Unterextrusion feststellen, empfehlen wir Ihnen, die Drucktemperatur leicht zu erhöhen. Geeignet sind die E3D V6 HS Nozzeln für eine maximale Temperatur von 500°C. Bitte beachten Sie, dass diese Düse nicht für den Druck von abrasiven Filamenten bei Temperaturen über 350°C geeignet ist, in diesem Fall wird eine Nozzle X Düse empfohlen. Eigenschaften der V6 Hardened Steel Düsen ✔ Standard-Düse mit Temperaturen bis 500°C ✔ Verschleißfreies Drucken✔ Ideale für abrasive Materialien   Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heizblöcken kompatibel. 

The Revo LGX represents a world-class extrusion system world-class extrusion system, thanks to the impressive fusion of Revo Micro and the LGX extruder from Bondtech. Revo Micro ensures a smooth and consistent filament consistent filament flow, which guarantees consistently high-quality printing results in every application. The LGX extruder is known for its impressive gear design gear design that offers outstanding torque and precision. Special features: Reach maximum temperatures of 300°C for versatile printing applications. Lightweight at only 30g for optimal freedom of freedom of movement of the print head. Use the RapidChange Revo nozzle type for effortless nozzle changes. Mounting with M12 x 1.5 thread for a stable and stable and reliable installation. Compatible with Bowden and direct drive systems for maximum versatility.

HTX nozzles are high-temperature, abrasion-resistant nozzles.Similar to ObXidian, HTX nozzles have a hardened steel tip, a copper carrier and a carrier and a copper expanding segment to optimize heat transfer to the heat sink. heat sink. The nozzle is then coated with chromium nitride to provide abrasion resistance up to 500°C.

Diamond tipped, NOT diamond coated Why diamond? The rapid evolution of fiber, metal and ceramic ceramic filaments has increased the demand for hard-wearing nozzles. Compared compared to all available options on the market, DiamondBack with its diamond diamond offers unparalleled wear resistance and remarkable versatility. remarkable versatility. These diamonds consist of numerous small diamond crystals bonded together by a proprietary bonding agent to form a matrix. matrix. This forms a structure of diamond-to-diamond bonds. The diamonds retain much of their hardness, while at the same time the brittleness of an brittleness of a single diamond is reduced, making them an outstanding choice for printing abrasive filaments. Extended lifetime The use of polycrystalline diamond (PCD) in every DiamondBack nozzle significantly extends its overall lifetime. The extreme hardness, wear resistance and thermal conductivity of this unique material material make it ideal for 3D printing. It offers outstanding thermal conductivity, a low coefficient of friction and high fracture fracture toughness. Creative experimentation The DiamondBack nozzle holders are made of brass and allow effortless replacement with other Revo nozzles. The diamond tip is used specifically to provide abrasion resistance at the nozzle opening and the flat tip. The easy interchangeability of the nozzles allows you to experiment with experiment with different sizes that you may not have tried before. tried before. Configure your 3D printer in no time for ultra-fine or ultra-thick extrusion widths. Print large objects in shorter time or tiny objects with high resolution. Get new printing pleasure Each Revo Nozzle consists of an already mounted nozzle and a HeatBreak in one unit, which eliminates dangerous overheating and incorrect incorrect assembly. Say goodbye to frustrating hot end leaks and hello to reliable 3D printing! Fast detection The color-coded silicone sock allows you to identify the recognize the nozzle sizes immediately. In addition, each Revo Nozzle has the size clearly engraved clearly engraved on each Revo Nozzle, avoiding confusing markings.

HTX hotside kits offer Revo users the opportunity to upgrade their equipment for reliable printing with high-temperature materials such as PEEK or PEI. The kits are available in three configurations: Standalone Revo Hotside Kit: 1 x HT block 1 x PT100 or PT1000 sensor 1 x High-precision (HT) or high-temperature heating cartridge (UHT) 1 x Revo spring Single Nozzle set: 1 x HT block 1 x PT100 or PT1000 sensor 1 x High-precision (HT) or high-temperature heating cartridge (UHT) 1 x Revo spring 1 x Revo HTX 0.4mm nozzle Fully assembled assembled kit: 1 x HT block 1 x PT100 or PT1000 sensor 1 x High-precision (HT) or high-temperature heating cartridge (UHT) 1 x Revo spring 1 x Revo HTX 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles Features of the Revo HTX Hotsides: High temperature and abrasion resistant nozzles Similar to like ObXidian, HTX nozzles have a hardened steel tip and a copper copper spreader segment to optimize the transfer of heat to the heat sink. heat sink. Coated with Chromium nitride coated for abrasion resistance up to 500°C. Important specifications: Maximum temperature: 400°C/500°C Filament diameter: 1.75mm Voltage: 24V Power: 40W or 65W Compatible with: Revo Micro, Revo Six, Revo Voron, Revo Creality, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2 and Revo LGX. Important notes: Revo™ nozzles are not compatible with V6 heating blocks. If your printer does not already have a PT100 sensor, an amplifier amplifier board is required for the PT100 hotside variant. When nozzle change, adjustments to the Z offset may be necessary. The The use of abrasives with 0.25 mm nozzles is not recommended due to the risk of nozzle of nozzle clogging, especially with particle sizes above 0.25 mm, is not recommended.

Revo Micro with adapter and extruder The Revo LGX is a world-class extrusion system, thanks to the powerful the powerful combination of Revo Micro and the LGX extruder from Bondtech. Bondtech. The Revo Micro ensures an even and consistent flow of filament filament flow, resulting in high quality prints in every application. Its lightweight and compact design offers excellent thermal performance, reduces heat-up times and prevents the build-up of heat, even during long prints. during longer print runs. The LGX extruder is known for its large gear design, which provides excellent torque and precision. This extruder is designed for a wide range of filament types and offers excellent grip, which ensures a flawless and reliable filament feed. The robust construction of the LGX extruder ensures smooth filament filament transport, reduces the risk of clogging and improves the overall overall print quality. Quick nozzle change Change nozzles at room temperature with your fingers. No complicated tools, no hot tightening. Revo nozzles are factory sealed nozzles and heat breaks in one, making them easy to fit and and no material can escape during use. There is a wide range of standard, high flow and abrasive nozzles are available. Performance at the core The Revo HeaterCore heats up in seconds. A positive temperature coefficient (PTC) means that the Revo HeaterCore does not melt at extreme temperatures. HeaterCore is not at risk of melting at extreme temperatures: its performance decreases the the hotter it gets, reducing the risk of thermal runaway. is reduced. Key features of the LGX extruder e-steps value: 400 at 16 microsteps; 800 at 32 microsteps. Drive wheels: Hardened steel; Material compatibility: Abrasive, rigid, semi-flexible, flexible and soft. Mounting holes: M3 Mounting pattern: bottom front (2 dots); left (2 dots), right (2 dots), front (4 points), rear (4 points) Holes on the sides of the LGX™: 5 mm depth Holes on the underside of the LGX™: 12 mm depth The maximum tightening torque for the extruder screws is 0.3 Nm. Please note: The Revo Micro fan must be connected via the 5V regulator if it is not connected not connected directly to a 5V pin. You may you may need to adjust the Z offset when changing nozzles. Start of form