E3D REVO Ultra High Temp Hotside Kits
€145.75*
Available in 2 days, delivery time 2-4 Werktage
Accessories
Product number:
SW10920.3
Free Shipping
Worldwide
Free Returns
Within 30 Days
Purchase on invoice
Always available
HTX hotside kits offer Revo users the opportunity to upgrade their equipment for reliable printing with high-temperature materials such as PEEK or PEI. The kits are available in three configurations:
- Standalone Revo Hotside Kit:
- 1 x HT block
- 1 x PT100 or PT1000 sensor
- 1 x High-precision (HT) or high-temperature heating cartridge (UHT)
- 1 x Revo spring
- 1 x HT block
- 1 x PT100 or PT1000 sensor
- 1 x High-precision (HT) or high-temperature heating cartridge (UHT)
- 1 x Revo spring
- 1 x Revo HTX 0.4mm nozzle
- 1 x HT block
- 1 x PT100 or PT1000 sensor
- 1 x High-precision (HT) or high-temperature heating cartridge (UHT)
- 1 x Revo spring
- 1 x Revo HTX 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles
Features of the Revo HTX Hotsides:
- High temperature and abrasion resistant nozzles
- Similar to like ObXidian, HTX nozzles have a hardened steel tip and a copper copper spreader segment to optimize the transfer of heat to the heat sink. heat sink.
- Coated with Chromium nitride coated for abrasion resistance up to 500°C.
Important specifications:
- Maximum temperature: 400°C/500°C
- Filament diameter: 1.75mm
- Voltage: 24V
- Power: 40W or 65W
- Compatible with: Revo Micro, Revo Six, Revo Voron, Revo Creality, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2 and Revo LGX.
Important notes:
- Revo™ nozzles are not compatible with V6 heating blocks.
- If your printer does not already have a PT100 sensor, an amplifier amplifier board is required for the PT100 hotside variant.
- When nozzle change, adjustments to the Z offset may be necessary.
- The The use of abrasives with 0.25 mm nozzles is not recommended due to the risk of nozzle of nozzle clogging, especially with particle sizes above 0.25 mm, is not recommended.
Login
E3D V6 Nozzle X - 1,75mm (0.25-0.80 mm)
E3D Nozzle X gehärtete Düse auf Werkzeugstahlbasis Nozzle X von E3D ist eine unglaublich robuste und abriebfeste 3D-Drucker Düse auf Basis von gehärtetem Werkzeugstahl. Um auch hohen Temperaturen von bis zu 500 °C stand zu halten, werden die Nozzle X Düsen mit Nickel veredelt und anschließend mit einer WS2-Beschichtung versehen. Mit den Nozzle X Düsen von E3D, können Sie problemfrei alle Filamente von PLA bis hin zu PEEK verarbeiten. Eigenschaften der Nozzle X✔ Hohe Hitzebeständigkeit (Temperaturen bis 500 °C möglich)
✔ Sehr Abriebfest dank des Nickelbeschichteten Werkzeugstahls
✔ Anti-Haftbeschichtung - Nanocoating aus polyphobem WS2 Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel.
Antihaftbeschichtung:
€34.89*
E3D V6 Nozzle X - 1,75mm (0.25-0.80 mm)
E3D Nozzle X gehärtete Düse auf Werkzeugstahlbasis Nozzle X von E3D ist eine unglaublich robuste und abriebfeste 3D-Drucker Düse auf Basis von gehärtetem Werkzeugstahl. Um auch hohen Temperaturen von bis zu 500 °C stand zu halten, werden die Nozzle X Düsen mit Nickel veredelt und anschließend mit einer WS2-Beschichtung versehen. Mit den Nozzle X Düsen von E3D, können Sie problemfrei alle Filamente von PLA bis hin zu PEEK verarbeiten. Eigenschaften der Nozzle X✔ Hohe Hitzebeständigkeit (Temperaturen bis 500 °C möglich)
✔ Sehr Abriebfest dank des Nickelbeschichteten Werkzeugstahls
✔ Anti-Haftbeschichtung - Nanocoating aus polyphobem WS2 Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel.
Antihaftbeschichtung:
€34.89*
E3D V6 Nozzle X - 1,75mm (0.25-0.80 mm)
E3D Nozzle X gehärtete Düse auf Werkzeugstahlbasis Nozzle X von E3D ist eine unglaublich robuste und abriebfeste 3D-Drucker Düse auf Basis von gehärtetem Werkzeugstahl. Um auch hohen Temperaturen von bis zu 500 °C stand zu halten, werden die Nozzle X Düsen mit Nickel veredelt und anschließend mit einer WS2-Beschichtung versehen. Mit den Nozzle X Düsen von E3D, können Sie problemfrei alle Filamente von PLA bis hin zu PEEK verarbeiten. Eigenschaften der Nozzle X✔ Hohe Hitzebeständigkeit (Temperaturen bis 500 °C möglich)
✔ Sehr Abriebfest dank des Nickelbeschichteten Werkzeugstahls
✔ Anti-Haftbeschichtung - Nanocoating aus polyphobem WS2 Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel.
Antihaftbeschichtung:
€34.89*
Craftbot Flow Generation Nozzle Kit
Nozzle Kit für die Craftbot Flow Generation 3D-Drucker
Das Nozzle Kit für die Craftbot Flow Generation 3D-Drucker, beinhaltet je eine 0.25, 0.4, 0.6 und 0.8mm Messing Düse.
€36.95*
Flashforge Creator 4 Nozzle Cooling Fan
Creator 4 Nozzle Cooling Fan
Replacement Nozzle Cooling Fan suitable for the Flashforge Creator 4 3D printer.
€17.45*
E3D REVO HTX Nozzle
HTX nozzles are high-temperature, abrasion-resistant nozzles.Similar to ObXidian, HTX nozzles have a hardened steel tip, a copper carrier and a
carrier and a copper expanding segment to optimize heat transfer to the heat sink.
heat sink. The nozzle is then coated with chromium nitride to provide
abrasion resistance up to 500°C.
€74.95*
Messing Nozzle für Raise3D Pro2 3D-Drucker
Messing Nozzel in verschiedenen Durchmessern - Raise3D Pro2
Die Messing Nozzel gibt es in verschiedenen Durchmessern (0.2, 0.4, 0.6, 0.8, 1.0 mm). Passend sind diese sowhol für die Raise3D Pro2 also auch für die N2 Serie.
€9.95*
E3D REVO Diamondback Nozzle
Diamond tipped, NOT diamond coated
Why diamond?
The rapid evolution of fiber, metal and ceramic
ceramic filaments has increased the demand for hard-wearing nozzles. Compared
compared to all available options on the market, DiamondBack with its diamond
diamond offers unparalleled wear resistance and remarkable versatility.
remarkable versatility.
These diamonds consist of numerous small diamond
crystals bonded together by a proprietary bonding agent to form a matrix.
matrix. This forms a structure of diamond-to-diamond bonds. The
diamonds retain much of their hardness, while at the same time the brittleness of an
brittleness of a single diamond is reduced, making them an
outstanding choice for printing abrasive filaments.
Extended lifetime
The use of polycrystalline diamond (PCD) in every
DiamondBack nozzle significantly extends its overall lifetime. The extreme
hardness, wear resistance and thermal conductivity of this unique material
material make it ideal for 3D printing. It offers outstanding
thermal conductivity, a low coefficient of friction and high fracture
fracture toughness.
Creative experimentation
The DiamondBack nozzle holders are made of brass and
allow effortless replacement with other Revo nozzles. The diamond tip
is used specifically to provide abrasion resistance at the nozzle opening and the
flat tip.
The easy interchangeability of the nozzles allows you to experiment with
experiment with different sizes that you may not have tried before.
tried before. Configure your 3D printer in no time for
ultra-fine or ultra-thick extrusion widths. Print large objects in
shorter time or tiny objects with high resolution.
Get new printing pleasure
Each Revo Nozzle consists of an already mounted nozzle
and a HeatBreak in one unit, which eliminates dangerous overheating and incorrect
incorrect assembly. Say goodbye to frustrating hot end leaks and hello to
reliable 3D printing!
Fast detection
The color-coded silicone sock allows you to identify the
recognize the nozzle sizes immediately. In addition, each Revo Nozzle has the size clearly engraved
clearly engraved on each Revo Nozzle, avoiding confusing markings.
€204.50*
E3D Volcano Nozzle X - 1.75mm (0.25-1.20 mm)
E3D Volcano Nozzle X hardened nozzle based on tool steel
Volcano Nozzle X from E3D is an incredibly robust and abrasion-resistant 3D printer nozzle based on hardened tool steel. In order to withstand high temperatures of up to 500 °C, the Volcano Nozzle X nozzles are refined with nickel and then coated with a WS2 coating.
With the Volcano Nozzle X nozzles from E3D, you can process all filaments from PLA to PEEK without any problems. Further information on the warranty and cleaning of the Nozzle X nozzles can be found here.
Features of the Nozzle X
✔ High heat resistance (temperatures up to 500 °C possible)✔ Very abrasion-resistant thanks to the nickel-coated tool steel✔ Non-stick coating - nanocoating made of polyphobic WS2
Please note: The Volcano nozzles are not compatible with the V6, SuperVolcano or Cyclops heating blocks.
€38.95*
Raise3D Pro2 Everlast Ruby Nozzle
Raise3D Everlast Ruby Nozzle - Abriebfeste Düsen
Die Everlast Ruby Nozzlen sind stabile und langlebige Düsen. Die Everlast Ruby Düsen sind mit einem Ruby-Sapphire Kern ausgestattet und ermöglicht es Ihnen so GlassFiber, CarbonFiber, Bronzefill und andere abrasive Materialien ohne verschleiss zu verarbeiten.
€72.95*
FlashForge Creator 4 HT Nozzle Assembly 0.4/0.6mm
Creator 4 HT Nozzle Assembly
Replacement hotend including nozzle (0.4 or 0.6 mm selectable) suitable for the Flashforge Creator 4 HT 3D printer.
€128.00*
E3D Rapidchange Revo Nozzle Assembly High Flow Boxed
Revolutionize your 3D printing with incredible
speed - a lightning-fast nozzle change of just 30 seconds makes it
possible! Thanks to the optimized internal nozzle geometry, you can achieve
high-flow results in the same compact form factor as the standard E3D
Revo. The High Flow Nozzles are compatible with the existing 40W HeaterCores
and maximize the flow rate when using standard printing materials.
Special features:
Reach temperatures of up to 300°C for versatile printing
printing applications.Use filaments with a diameter of 1.75 mm for precise and
precise and detailed printing results.Operate the system with a voltage of 24V for reliable
reliable performance.Experience the future of 3D printing - fast, efficient and
flexible!
€53.95*
Creator 3 Pro/Creator 4/Guider 3 Nozzle 0.4-0.8mm
Creator 4 Standard Nozzle
Standard Nozzle suitable for the Flashforge Creator 3 Pro and Creator 4. The Hardened Steel Nozzles are available in the diameters 0.4, 0.6 and 0.8mm.
The nozzles are suitable for the following Flashforge 3D printers:
- Creator 3- Creator 4- Guider 3- Guider 3 Plus
€24.45*
Messing Nozzle für Raise3D Pro2 3D-Drucker
Messing Nozzel in verschiedenen Durchmessern - Raise3D Pro2
Die Messing Nozzel gibt es in verschiedenen Durchmessern (0.2, 0.4, 0.6, 0.8, 1.0 mm). Passend sind diese sowhol für die Raise3D Pro2 also auch für die N2 Serie.
€9.95*
Raise3D Pro2 Everlast Ruby Nozzle
Raise3D Everlast Ruby Nozzle - Abriebfeste Düsen
Die Everlast Ruby Nozzlen sind stabile und langlebige Düsen. Die Everlast Ruby Düsen sind mit einem Ruby-Sapphire Kern ausgestattet und ermöglicht es Ihnen so GlassFiber, CarbonFiber, Bronzefill und andere abrasive Materialien ohne verschleiss zu verarbeiten.
€72.95*
Funmat Pro 410 G1 Retractable Hardened Steel Nozzle 0.4/0.6mm (linke Düse)
Retractable Hardened Steel Nozzle für den Intamsys Pro 410
Die Retractable Nozzle ist die linke Düse für den Intamsys Pro 410 3D-Drucker. Hier handelt es sich um die einziehbare Düse aus für die Kalibrierung des Druckbetts. Die Düse ist in 0.4 und 0.6mm erhältlich. Die Düse besteht aus gehärtetem Stahl und ist dadurch sehr Wiederstandsfähig.
€88.57*
3DSolex Nozzle für Raise3D Pro2 / E2 / Pro3 Serie - 2er Set
3D Solex Düsen passend für die Raise3D 3D-Drucker
Die 3DSolex Düsen bestehen aus beschichtetem Messing. Erhätlich sind die Nozzeln in verschiedenen Durchmessern (0.25, 0.4 und 0.8mm) und sind kompatibel mit der Raise3D Pro2, Pro3 und E2 3D-Drucker-Serie
€41.95*
Raise3D PRO3 Series Interchangeable Hotend with V3H Nozzle (0.2-1.0mm)
Raise3D Pro3 Interchangeable Hotend with V3H nozzle
The interchangeable hotends for the Raise3D Pro3 3D printers come fully assembled and can be inserted directly into the 3D printer. The hotend is available with different nozzle diameters from 0.2 - 1.0mm. Thanks to the new and innovative "one-click system", the Raise3D Pro3 ho tends can be changed quickly and easily.
€141.95*
E3D REVO Diamondback Nozzle
Diamond tipped, NOT diamond coated
Why diamond?
The rapid evolution of fiber, metal and ceramic
ceramic filaments has increased the demand for hard-wearing nozzles. Compared
compared to all available options on the market, DiamondBack with its diamond
diamond offers unparalleled wear resistance and remarkable versatility.
remarkable versatility.
These diamonds consist of numerous small diamond
crystals bonded together by a proprietary bonding agent to form a matrix.
matrix. This forms a structure of diamond-to-diamond bonds. The
diamonds retain much of their hardness, while at the same time the brittleness of an
brittleness of a single diamond is reduced, making them an
outstanding choice for printing abrasive filaments.
Extended lifetime
The use of polycrystalline diamond (PCD) in every
DiamondBack nozzle significantly extends its overall lifetime. The extreme
hardness, wear resistance and thermal conductivity of this unique material
material make it ideal for 3D printing. It offers outstanding
thermal conductivity, a low coefficient of friction and high fracture
fracture toughness.
Creative experimentation
The DiamondBack nozzle holders are made of brass and
allow effortless replacement with other Revo nozzles. The diamond tip
is used specifically to provide abrasion resistance at the nozzle opening and the
flat tip.
The easy interchangeability of the nozzles allows you to experiment with
experiment with different sizes that you may not have tried before.
tried before. Configure your 3D printer in no time for
ultra-fine or ultra-thick extrusion widths. Print large objects in
shorter time or tiny objects with high resolution.
Get new printing pleasure
Each Revo Nozzle consists of an already mounted nozzle
and a HeatBreak in one unit, which eliminates dangerous overheating and incorrect
incorrect assembly. Say goodbye to frustrating hot end leaks and hello to
reliable 3D printing!
Fast detection
The color-coded silicone sock allows you to identify the
recognize the nozzle sizes immediately. In addition, each Revo Nozzle has the size clearly engraved
clearly engraved on each Revo Nozzle, avoiding confusing markings.
€204.50*
FlashForge Creator 3 Hardened-Steel Nozzle 0.4/0.6mm
Creator 3 Hardened Steel Nozzle
Replacement 0.4mm diameter hardened steel nozzle suitable for the Flashforge Creator 3 3D printer.
€21.90*
Messing Nozzle für Raise3D Pro2 3D-Drucker
Messing Nozzel in verschiedenen Durchmessern - Raise3D Pro2
Die Messing Nozzel gibt es in verschiedenen Durchmessern (0.2, 0.4, 0.6, 0.8, 1.0 mm). Passend sind diese sowhol für die Raise3D Pro2 also auch für die N2 Serie.
€9.95*
E3D Volcano Nozzle X - 1.75mm (0.25-1.20 mm)
E3D Volcano Nozzle X hardened nozzle based on tool steel
Volcano Nozzle X from E3D is an incredibly robust and abrasion-resistant 3D printer nozzle based on hardened tool steel. In order to withstand high temperatures of up to 500 °C, the Volcano Nozzle X nozzles are refined with nickel and then coated with a WS2 coating.
With the Volcano Nozzle X nozzles from E3D, you can process all filaments from PLA to PEEK without any problems. Further information on the warranty and cleaning of the Nozzle X nozzles can be found here.
Features of the Nozzle X
✔ High heat resistance (temperatures up to 500 °C possible)✔ Very abrasion-resistant thanks to the nickel-coated tool steel✔ Non-stick coating - nanocoating made of polyphobic WS2
Please note: The Volcano nozzles are not compatible with the V6, SuperVolcano or Cyclops heating blocks.
€38.95*
E3D V6 Brass/Messing Nozzle - 1,75mm (0.15-0.80 mm)
E3D V6 Brass Nozzeln
Die V6 Brass oder Messing Düsen sind unteranderem für die E3D V6 Heizblöcke konzepiert. Die E3D V6 Messing Düsen gibt es in verschiedenen Düsendurchmessern von 0.15mm bis 0.80mm.
Die V6 Messing-Nozzle mit den charakteristischen Merkmalen von E3D verfügen über perfekte thermische Eigenschaften die für den alltäglichen Druck erforderlich sind. Sie sorgen für glatte Schichten und eine guten Zwischenschichthaftung. Ausgelegt sind die Düsen für eine maximale Temperatur von 300°C.
Eigenschaften der V6 Messing Düsen
✔ Standard-Düse mit Temperaturen bis 300°C ✔ Sehr glatte Oberflächen sind möglich✔ Ideale thermische Eigenschaften
Bitte beachten Sie die V6 Düsen sind nicht mit dem Volcano, SuperVolcano oder Cyclops Heitzblöcken kompatibel.
€19.85*
Creator 3 Pro/Creator 4/Guider 3 Nozzle-Set Gehärtet (0.4/0.6/0.8 mm)
Nozzle-Set Hardened Steel für Creator 3 Pro und 4
Das Nozzle-Set besteht aus insgesamt 6 Düsen aus gehärtetem Stahl (je 2 mal 0.4 / 0.6 / 0.8mm).
Die Düsen sind passend für die folgenden Flashforge 3D-Drucker:
- Creator 3- Creator 4- Guider 3- Guider 3 Plus
€77.95*
