E3D Heizblöcke für 3D-Drucker kaufen
E3D V6 Stainless Steel HeaterBlock für Sensor Cartridges
Verbesserter E3D V6 Stainless Steel Heater Block
Der E3D V6 Heater Block, wurde so verbessert, dass er sowohl die Heizpatrone als auch den Temperatursensor (Thermistor) an Ort und Stelle fest zu klemmen kann. Diese Designverbesserung sorgt für ein besseres thermisches Verhalten des HotEnds und eine leichtere Montage des Thermistors.
Information: V5 und V6 HeaterBlocks sind kreuzkompatibel, beide verwenden ein M6-Gewinde. Beachten Sie, dass die V6 HeaterBlocks 0,5 mm kürzer sind als die v5.
Lieferumfang
1x E3D Stainless Steel Heater Block1x M3x0,5x4 Innensechskantschraube und Unterlegscheibe zum Klemmen des Thermistors1x M3x0,5x10 Innensechskantschraube zum Klemmen der Heizpatrone
€26.39*
E3D Volcano HeaterBlock für Sensor Cartridges
E3D Volcano Stainless Steel Heater Block
E3D Volcano Heater Block, wurde so verbessert, dass er sowohl die Heizpatrone als auch den Temperatursensor (Thermistor) an Ort und Stelle fest zu klemmen kann. Diese Designverbesserung sorgt für ein besseres thermisches Verhalten des HotEnds und eine leichtere Montage des Thermistors.
Information: Dieser Block kann nur mit den Volcano Düsen verwendet werden. Es können keine anderen Düsen genutzt werden.
Lieferumfang
1x E3D Volcano Heater Block1x M3x0,5x4 Innensechskantschraube und Unterlegscheibe zum Klemmen des Thermistors1x M3x0,5x10 Innensechskantschraube zum Klemmen der Heizpatrone
€26.39*
E3D V6 Plated Copper HeaterBlock
V6 Plated Copper Heater Block - Hochtemperatur Heizblock von E3D
Sie sind auf der Suche einem Heizblock für hohe Temperaturen? Rüsten Sie Ihren 3D-Drucker mit einem V6-Heizblock aus plattiertem Kupfer auf.
Mit dem V6 Plated Copper Heizblock, können Sie Temperaturen von bis zu 500 °C erreichen (vorausgesetzt, Sie verwenden einen PT100 oder PT1000 Sensor). Dies gibt Ihnen die Möglichkeit Kunststoffe wie Ultem und PEEK zu drucken.
Das Kit beinhaltet:
1x V6 plated copper HeaterBlock1x M3 Madenschraube1x M3-Kuppelkopfschraube
Vorteile des Plated Copper Heater Block
✔ Drucktemperaturen von bis zu 500°C möglich✔ Reduziertes Stick Coating✔ Kompatibel mit allen V6 Düsen
€29.85*
E3D REVO High-Temperature Block With Fixings
With this HeaterBlock made of clad copper, you can reach a temperature of up to
reach a temperature of up to 500 °C with your Revo system (provided
you use a PT100 or PT1000), which opens up the possibilities of printing high-temperature filaments
high temperature filaments such as Ultem and PEEK.
€55.85*
E3D REVO Ultra High Temp Hotside Fully Loaded Kit
HTX hotside kits enable Revo users to enhance their printing
improve their printing systems and work reliably with high-performance materials such as
PEEK or PEI at elevated temperatures. There are three different
options for the HTX hotside kits:
Standalone
Revo Hotside Kit:
1 x
HT block
1 x
PT100 or PT1000 sensor
1 x
High-precision (HT) or high-temperature heating cartridge (UHT)
1 x
Revo spring
Single
Nozzle set:
1 x
HT block
1 x
PT100 or PT1000 sensor
1 x
High-precision (HT) or high-temperature heating cartridge (UHT)
1 x
Revo spring
1 x
Revo HTX 0.4mm nozzle
Fully assembled
assembled kit:
1 x
HT block
1 x
PT100 or PT1000 sensor
1 x
High-precision (HT) or high-temperature heating cartridge (UHT)
1 x
Revo spring
1 x
Revo HTX 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles
Revo HTX Hotsides: The HTX nozzles offer high temperature
temperature and abrasion resistance. With a hardened steel tip and a copper
a copper expanding segment for optimum heat transfer, they are coated with
coated with chromium nitride to ensure abrasion resistance up to 500°C.
Key features:
Maximum
temperature: 400°C/500°C
Filament diameter:
1.75mm
Voltage:
24V
Power:
40W or 65W
Compatibility
with various Revo models, including Revo Micro, Revo Six, Revo
Voron, Revo Creality, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini,
Revo MicroSwiss NG, Revo Biqu H2 V2 and Revo LGX.
Please note:
Revo™ nozzles
are not compatible with V6 heating blocks.
If
your printer does not have a PT100 sensor, an amplifier board is
is required for the PT100 hotside variant.
When
changing nozzles, it may be necessary to adjust the Z offset.
The
The use of abrasives with 0.25 mm nozzles is not recommended in order to avoid
avoid clogging due to larger particle sizes,
especially with fibers.
€365.75*