%

Creator 4 A HT is a multifunctional, flexible and powerful FDM 3D printer The Flashforge Creator 4 adapts to your needs. Three different print heads can be used, so a wide variety of printing needs can be met. Each print head can process different materials, you can find a detailed listing below. Our offer is for the Creator 4A HT, the other two printheads/extruders F and HS will then be available from Q2/2022. Large print volume With a print volume of 400 x 350 x 500 mm, you can cover a wide range of parts to be produced. Independent dual extruder Unlike conventional dual extruders, the second IDEX extruder is not located in the print area of the model, so the filament does not drip and therefore does not affect the quality of the model. Ideally, this system is also suitable for duplex 3D printing and to produce two components in parallel. Wide range of materials Creator 4 is compatible with various filaments with a maximum temperature of 360℃. Creator 4 series is suitable for Flashforge Supreme filaments. This series was developed in collaboration with the German company LEHVOSS. They are characterized by reduced shrinkage during printing and lower warpage. It meets the strength and temperature resistance required by technical mechanics. The filaments are certified by the German LEHVOSS laboratory. Furthermore, third party filaments can of course be used. Heated pressure chamber for warp-free printing The advanced thermal control technology can preheat and also maintain the temperature before and after printing. The thermal control system maintains a constant chamber temperature of up to 65 °C, reducing thermal contraction of the model during printing. It avoids warpage and cracking of ABS/PC/PA and other technical filaments and guarantees high quality and dimensional stability of the model. Innovative control Using USB or WIFI, data can be transferred directly from the PC to the printer. With the clear 7 inch touch screen you have the complete printing and maintenance process under control. Printing plate The Creator 4 is equipped with a flexible and magnetic printing plate. This makes it easy to detach the print objects from the printing plate. The print bed can be heated up to 120°C.

€8,999.00* €9,494.00* (5.21% saved)

%

Flashforge Creator 4 A HT 3D Printer

Creator 4 A HT is a multifunctional, flexible and powerful FDM 3D printer The Flashforge Creator 4 adapts to your needs. Three different print heads can be used, so a wide variety of printing needs can be met. Each print head can process different materials, you can find a detailed listing below. Our offer is for the Creator 4A HT, the other two printheads/extruders F and HS will then be available from Q2/2022. Large print volume With a print volume of 400 x 350 x 500 mm, you can cover a wide range of parts to be produced. Independent dual extruder Unlike conventional dual extruders, the second IDEX extruder is not located in the print area of the model, so the filament does not drip and therefore does not affect the quality of the model. Ideally, this system is also suitable for duplex 3D printing and to produce two components in parallel. Wide range of materials Creator 4 is compatible with various filaments with a maximum temperature of 360℃. Creator 4 series is suitable for Flashforge Supreme filaments. This series was developed in collaboration with the German company LEHVOSS. They are characterized by reduced shrinkage during printing and lower warpage. It meets the strength and temperature resistance required by technical mechanics. The filaments are certified by the German LEHVOSS laboratory. Furthermore, third party filaments can of course be used. Heated pressure chamber for warp-free printing The advanced thermal control technology can preheat and also maintain the temperature before and after printing. The thermal control system maintains a constant chamber temperature of up to 65 °C, reducing thermal contraction of the model during printing. It avoids warpage and cracking of ABS/PC/PA and other technical filaments and guarantees high quality and dimensional stability of the model. Innovative control Using USB or WIFI, data can be transferred directly from the PC to the printer. With the clear 7 inch touch screen you have the complete printing and maintenance process under control. Printing plate The Creator 4 is equipped with a flexible and magnetic printing plate. This makes it easy to detach the print objects from the printing plate. The print bed can be heated up to 120°C.

€12,241.37* €13,498.00* (9.31% saved)

Flashforge Creator 4 Heating Rod

Heating Rod für Creator 4 Heating Rod bzw. Heizpatrone passend für den Flashforge Creator 4 3D-Drucker kaufen.

€19.95*

FlashForge Creator 4 Extruder Assembly HT kaufen

FlashForge Creator 4 Extruder Assembly HT 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HT - Extruder unit up to 320°C. The Extruder Assembly HT is the standard print head of the Flashforge Creator 4A HT 3D printer. It can process standard materials up to 320°C. More information about the HT extruder ✔ Design: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 320°C. ✔ Max. Print speed: up to 200 mm/sec.✔ Compatible materials: PLA - ABS - ASA - PP - PA - PA CF - PC - HIPS - BVOH - PETG - PC-ABS. Overview of all extruders for the Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this is experimental and at your own risk).

€647.00*

Flashforge Creator 4 Nozzle Temperatur Sensor

Temperatur Sensor für Creator 4 Nozzle Temperatur Sensor passend für den Flashforge Creator 4 3D-Drucker kaufen.

€26.29*

FlashForge Creator 4 Extruder Assembly HS kaufen

FlashForge Creator 4 Extruder Assembly HS 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HS - Extruder unit up to 360°C Extruder Assembly HS is the extruder unit especially for abrasive materials like carbon fiber or glass fiber reinforced plastics. Instead of a brass nozzle, the HS print head has a hardened steel nozzle (choice of 0.4 or 0.6mm). With this extruder assembly, you can turn your Flashforge Creator 4 A HT into a Creator 4 HS 3D printer for fast printing with abrasive plastics. More information about the HS Extruder ✔ Version: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm (hardened nozzles)✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 360°C. ✔ Max. Print speed: up to 150 mm/sec.✔ Compatible materials: PA-GF- PA-CF - PET-CF - PP-CF - PP-GF - PC-ABS - PPS CF - PPS (and all standard materials as for extruder-HT). Overview of all extruders for Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this isexperimental and at your own risk).

€794.00*

FlashForge Creator 4 Extruder Assembly HS 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HS - Extruder unit up to 360°C Extruder Assembly HS is the extruder unit especially for abrasive materials like carbon fiber or glass fiber reinforced plastics. Instead of a brass nozzle, the HS print head has a hardened steel nozzle (choice of 0.4 or 0.6mm). With this extruder assembly, you can turn your Flashforge Creator 4 A HT into a Creator 4 HS 3D printer for fast printing with abrasive plastics. More information about the HS Extruder ✔ Version: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm (hardened nozzles)✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 360°C. ✔ Max. Print speed: up to 150 mm/sec.✔ Compatible materials: PA-GF- PA-CF - PET-CF - PP-CF - PP-GF - PC-ABS - PPS CF - PPS (and all standard materials as for extruder-HT). Overview of all extruders for Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this isexperimental and at your own risk).

€794.00*

FlashForge Creator 4 Extruder Assembly HS 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HS - Extruder unit up to 360°C Extruder Assembly HS is the extruder unit especially for abrasive materials like carbon fiber or glass fiber reinforced plastics. Instead of a brass nozzle, the HS print head has a hardened steel nozzle (choice of 0.4 or 0.6mm). With this extruder assembly, you can turn your Flashforge Creator 4 A HT into a Creator 4 HS 3D printer for fast printing with abrasive plastics. More information about the HS Extruder ✔ Version: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm (hardened nozzles)✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 360°C. ✔ Max. Print speed: up to 150 mm/sec.✔ Compatible materials: PA-GF- PA-CF - PET-CF - PP-CF - PP-GF - PC-ABS - PPS CF - PPS (and all standard materials as for extruder-HT). Overview of all extruders for Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this isexperimental and at your own risk).

€794.00*

Flashforge Creator 4 HEPA Luftfilter kaufen

Flashforge Creator 4 HEPA Air Filter

Creator 4 HEPA Filter Replacement air filter suitable for the Flashforge Creator 4 3D printer.

€29.45*

FlashForge Creator 4 Extruder Assembly HT 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HT - Extruder unit up to 320°C. The Extruder Assembly HT is the standard print head of the Flashforge Creator 4A HT 3D printer. It can process standard materials up to 320°C. More information about the HT extruder ✔ Design: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 320°C. ✔ Max. Print speed: up to 200 mm/sec.✔ Compatible materials: PLA - ABS - ASA - PP - PA - PA CF - PC - HIPS - BVOH - PETG - PC-ABS. Overview of all extruders for the Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this is experimental and at your own risk).

€647.00*

FlashForge Creator 4 Extruder Assembly HS 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HS - Extruder unit up to 360°C Extruder Assembly HS is the extruder unit especially for abrasive materials like carbon fiber or glass fiber reinforced plastics. Instead of a brass nozzle, the HS print head has a hardened steel nozzle (choice of 0.4 or 0.6mm). With this extruder assembly, you can turn your Flashforge Creator 4 A HT into a Creator 4 HS 3D printer for fast printing with abrasive plastics. More information about the HS Extruder ✔ Version: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm (hardened nozzles)✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 360°C. ✔ Max. Print speed: up to 150 mm/sec.✔ Compatible materials: PA-GF- PA-CF - PET-CF - PP-CF - PP-GF - PC-ABS - PPS CF - PPS (and all standard materials as for extruder-HT). Overview of all extruders for Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this isexperimental and at your own risk).

€794.00*

FlashForge Creator 4 Extruder Assembly HT 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HT - Extruder unit up to 320°C. The Extruder Assembly HT is the standard print head of the Flashforge Creator 4A HT 3D printer. It can process standard materials up to 320°C. More information about the HT extruder ✔ Design: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 320°C. ✔ Max. Print speed: up to 200 mm/sec.✔ Compatible materials: PLA - ABS - ASA - PP - PA - PA CF - PC - HIPS - BVOH - PETG - PC-ABS. Overview of all extruders for the Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this is experimental and at your own risk).

€647.00*

Flashforge Creator 4 Nozzle Cooling Fan

Creator 4 Nozzle Cooling Fan Replacement Nozzle Cooling Fan suitable for the Flashforge Creator 4 3D printer.

€17.45*

FlashForge Creator 4 Extruder Assembly HT 0.4 / 0.6mm Right/Left

Creator 4 Extruder Assembly HT - Extruder unit up to 320°C. The Extruder Assembly HT is the standard print head of the Flashforge Creator 4A HT 3D printer. It can process standard materials up to 320°C. More information about the HT extruder ✔ Design: Right or left✔ Nozzle diameter: 0.4 mm or 0.6mm✔ Filament diameter: 1.75 mm✔ Max. Temperature: up to 320°C. ✔ Max. Print speed: up to 200 mm/sec.✔ Compatible materials: PLA - ABS - ASA - PP - PA - PA CF - PC - HIPS - BVOH - PETG - PC-ABS. Overview of all extruders for the Creator 4 Important information for use It is not possible to combine different die diameters on the left and right side. It is basically possible to use a different extruder unit on the left and on the right side (this is experimental and at your own risk).

€647.00*