€18,028.00*
Free shipping
Available in 7 days, delivery time 1-2 weeks
Modix BIG Meter V4 - New Version
The BIG Meter is a 3D printer with a cube-shaped print space. This is more than 1m in each axis.
The Modix BIG Meter V4 is a unique 3D printing system that combines a large print volume, high quality components and an affordable price.
Information: With the selection variant "Modix BIG Meter assembled (ready to print)", the 3D printer is completely assembled and set up by us. The printer will then be shipped to you ready to print via freight forwarding.
New 2022 Generation
The following innovations are already integrated as standard:
1. new and improved Griffin print head
2. crash detectors (prevent collision between print head and print bed)
3. clog detectors (detects clogging and filament feeding problems)
The most important features at a glance
✔ Kit for self-assembly (Or optionally by our BFI3D service team)
✔ Large print volume of 1010 x 1010 x 1010 mm (XYZ)
✔ Many expansion possibilities (Second printhead, housing, air filter...)
✔ High-quality components from E3D, Trinamic, IGUS, and DUET3D.
✔ Easy handling and network control
✔ Automatic calibration (BL touch sensor)
✔ IDEX extruder system optionally available
The most important features at a glance
✔ Kit for self-assembly (Or optionally by our BFI3D service team)
✔ Large print volume of 1010 x 1010 x 1010 mm (XYZ)
✔ Many expansion possibilities (Second printhead, housing, air filter...)
✔ High-quality components from E3D, Trinamic, IGUS, and DUET3D.
✔ Easy handling and network control
✔ Automatic calibration (BL touch sensor)
✔ IDEX extruder system optionally available
The Modix BIG 3D printers in comparison
Chassis & Housing
The frame of the Modxi BIG Meter V4 consists of a solid 40x40 T-slot aluminum profile. The optional housing is made of 3mm thick black aluminum composite panels (ACP).
3D Printer Controller
✔ Duet 2 WLAN 3D printer controller from UK.
✔ Powerful 32-bit processor.
✔ Dedicated Wifi module with external antenna.
✔ Very quiet TMC2660 stepper driver, up to 256 microsteps.
✔ Two extruders on the main board, up to 5 more extruders on the expansion board.
✔ High load capacity: each stepper driver can supply a motor current of 2.8A.
✔ On-board web interface via PC
Interface & Touchscreen
The Modix BIG Meter V4 features a 7-inch full-color Duet3D touchscreen. Control the 3D printer directly via the touchscreen or mobile via cell phone or PC.
Guide and motion system
✔ Hiwin MGW9H linear guide rails
✔ Four recirculating ball screws for the Z axis
✔ GT2 timing belts reinforced with glass fiber
✔ Axis motors: Motech Nema 17 60mm length MT-1705HS200A
✔ Position accuracy: X-10 micron, Y-10 micron, Z-0.5 micron
✔ Print speed: Normal quality 60 mm/sec, Fast 100 mm/sec (0.4mm nozzle)
Print bed
The Modix BIG Meter V4 print bed consists of a 6.35mm thick milled Alcoa Mic6 cast aluminum plate. The associated 1370-watt print bed heater requires an additional 15A AC source. Two heating zones promise uniform heating performance with low power consumption. The pressure plate can be heated up to 120°C and is coated with a 3M PEI adhesive film.
Fully automatic print bed calibration
The Modix BIG Meter V4 is equipped with an automatic print bed calibration system. As a result, Modix now offers a complete automated calibration routine that includes the following:
- Bed slope calibration
- Pressure bed calibration
- Gantry alignment
- Z-offset calibration
IDEX extruder for dual printing
The "IDEX" stands for Independent Dual Extruder, here each of the extruders can move independently. While the active extruder is printing, the second extruder is "parked" outside the printing area. This makes dual material printing produced with IDEX technology cleaner and with a higher success rate compared to other configurations.
IDEX enables the production of advanced models with nested geometries by using water-soluble filament. A thin separating layer of water-soluble filament can be applied between the support contour of the building material and the object, saving a lot of work afterwards, which would occur when removing the regular support structure. When using soluble support material, there is no need to set a gap between the object and the support structure, this is usually the case when the same material is used for support (following picture right side). As a result, the supported surfaces on the object are obtained with a very good surface quality.
The IDEX extruder is sold as an optional add-on and includes:
- A secondary pressure subsystem: Griffin pressure head, clog detector, PTFE, spool holder.
- The motion system: secondary Y-axis motor with necessary components (belts, pulleys, etc.).
- Metal brackets for Y-axis and print heads.
- Wires, drag chains and optical end stops.
New Griffin printhead
Previously an optional upgrade, the Griffin printhead is now the standard printhead on all Modix 3D printers. It consists of a custom extruder from Bondtech (based on the BMG model) and a new hot end from Modix. The new design comes standard with every Modix printer and includes the following enhancements:
High flow rate & high printing temperatures
The Bondtech extruder features a dual drive system that grips the filament from both sides. The heater block is made of nickel-coated copper for increased heat transfer rate and compatibility with higher temperatures. The design incorporates the advanced Slice Engineering Bi-Metal Heat-Break, which expands the melt zone inside the heat block. In addition, an improved PT-1000 temperature sensor enables high-temperature printing up to 500 °C. The hotend components are rated for 500°C and have previously been verified with prints up to 340°C.
Higher reliability
When printing large objects, there is usually a risk of the printhead scratching the surface or bumping against the layers of the model, which can lead to bent or broken heatbreaks. The new printhead offers rigid mounting of the heat block, reducing such failure situations.
Improved user experience
The new printhead design facilitates nozzle replacement. The rigid mounting of the heating block enables one-handed nozzle replacement, making it even easier to change to other nozzle diameters.
Easy replacement
Slice Engineering's mounting bracket design and heat-break D-shank style give users the ability to easily replace the entire printhead. This allows users to specify a complete setup for a specific filament type. i.e. one setup for abrasive, carbon-filled filament and another for prototyping with PLA.
Smart
The new printhead allows automatic Z-offset calibration between the nozzle and BL touch probe. This is easier and more precise than the manual process. A special sensor allows the BL-Touch and nozzle to touch the surface. The exact relative distance between probe and nozzle ("Z-Offset") is automatically stored in the printer.
*The brass nozzle must be replaced with a nozzle suitable for higher temperatures above 300 °C
Erweiterungsmöglichkeiten für den Modix BIG Meter V4
Modix bietet Ihnen verschiedene Add-Ons für die jeweiligen 3D-Drucker mit an. Folgende Erweiterungen sind für den Modix BIG 60 optional erhältlich:
✔ IDEX-Dual Extruder (Drucken Sie mit Stützmaterial oder mehrere Objekte gleichzeitig)
✔ Luftfilter (Filter gesundheitsschädliche Dämpfe während des Druckprozesses)
✔ Magnetischedruckplatte (Einfaches entfernen der gedruckten Objekte von der Druckplatte)
✔ E3D Super Volcano Hotend (Ermöglicht den Hochgeschwindigkeitsdruck und die Verwendung einer 1mm Düse)
Delivery
The Modix BIG Meter V4 3D printer is delivered as a kit for self-assembly. This has the advantage that the high-quality 3D printer can be offered at a very attractive price. For assembly, an online support access is available which guides you step by step through the assembly process (videos and 3D views are available).
Information: The assembly and commissioning (especially for beginners in the 3D printing field) can be complex. Therefore, we are happy to offer you optional assembly and commissioning by our trained service personnel. Please note that with this option, additional shipping costs are not included in the price.
You are welcome to contact us for an individual offer at +49 911 94576 75 or by mail sales@bfi-it.de.
Additional Features: | Modular system |
---|---|
Ausführung: | Großformat 3D-Drucker |
Condition: | Closed installation space |
Extruder: | Dual extruder |
Extruder2: | Dual extruder |
Features: | Air filter, Automatic calibration, Filament RunOut Sensor, Heated pressure plate, Network-compatible, Open filament system |
Field of application: | Industry, Production of detailed parts, Production of stable components, Prototype production, Small series production, Training/education |
Installation space: | > 30 cm |
Material: | ABS, ABS-ESD, ASA, BVOH, CPE, Carbon, HIPS, PET, PET-G, PLA, PVA, TPU |
Print volume: | Installation space: 1010×1010×1010mm |
Properties: | Closed pressure chamber, Heated pressure plate |
Technology: | FDM/FFF (Fused Filament Fabrication) |
Login