Extrudr GreenTEC Pro Carbon Filament

GreenTEC Pro Carbon is a fiber-reinforced material and is characterized by is characterized by exceptional mechanical properties.

Elongation at break

The carbon fibers it contains create a particularly hard and and rigid material, ideal for high loads during the printing process.

Heat resistance

The proportion of carbon fibers not only improves the (VICAT) of the material, but also the HDT value under load. under load.

Printing difficulties

It should be noted that carbon is abrasive, which is why we recommend the recommend the use of a hardened nozzle. The carbon fibers contribute to stabilize the material, reduce distortion and ensure a stable melt during bridging. stable melt during bridging. For this reason, this filament is filament is also suitable for beginners.

Optical quality

The small carbon fibers are at right angles to the printed printed surface, which creates a beautifully matt surface and hides potential hides potential layer defects. This gives the printed object an extremely extremely high-quality appearance.

Adhesion of the layers

The challenge was to ensure good adhesion of the layers layers with a high proportion of carbon. This goal was achieved through the use of special biological additives. We recommend a printing temperature of around 230-240°C. Although the material can be printed from around 200°C can be printed, the layer adhesion suffers significantly below this temperature. For this reason For this reason, we recommend printing a "heat "Heattower" to determine the optimum settings for your particular device. for your particular device.

Impact resistance

The high proportion of carbon fibers gives the material excellent excellent impact resistance and enables outstanding resistance to impacts. against impacts.

• High load capacity
• Suitable for lightweight construction
• High thermal load capacity 165°C (Vicat VST)
• Comparable UV stability to e.g. ASA
• REACH & RoHS
• Hardened nozzle min. 0.5mm is recommended