Prices incl. VAT plus shipping costs
Free of shipping costs!
Delivery time ca. 30-45 Workdays
- EAN 0715235125564
Creatbot D600 PRO - Advanced Large Format 3D Printer
The Creatbot D600 Pro, is an industrial high-temp large format 3D printer. Thanks to the completely enclosed print chamber and a volume of 600 x 600 x 600 mm, the D600 Pro is ideal for the production of large objects with technical materials such as ABS, ASA, PET-G, PA or even carbon. With a maximum extruder temperature of 420°C, there are virtually no limits.
The most important features at a glance
✔ Large print volume 600 x 600 x 600 mm
✔ Dual extruder up to 420°C
✔ Filament sensor
✔ Large material variety (PLA, ABS, PET-G, TPU, Nylon, PC, PP, HIPS, PVA, Carbon, Ultem, PEEK, etc.)
✔ Automatic print bed calibration
✔ Air filter system
✔ Heated pressure chamber up to 70°C
✔ Pressure bed heated up to max. 100°C
✔ Heated filament chamber up to 65°C
✔ Closed pressure chamber
✔ High precision up to 0.04 mm
Precise linear guide rails
Due to the precise linear guides, models can be manufactured with a very high accuracy. This is 4-5 times higher than with ordinary optical axis printers. In addition, it provides more accurate filament feeding which contributes to fast and perfect printing.
Closed & heated print chamber up to 70 °C
The Creatbot D600 Pro 3D printer features a completely enclosed print chamber. This prevents the printed layers from cooling too quickly and ensures perfect interlayer adhesion. In combination with the heated print chamber of up to 70°C, this prevents warpage and deformation of the printed parts.
Heated filament chamber
Due to the heated filament chamber, your filament is always print ready. You can dry filaments like nylon or PC which have high water absorption in the chamber. The chamber can be heated up to 45°C or maximum 65°C.
Automatic print bed calibration
Intelligent print bed calibration via BL touch sensor uses 25 measurement points to be able to achieve the ideal print bed leveling.
HEPA air filtration system
The air filter system absorbs contaminants and gases generated by printing individual filaments. This also makes the CreatBot D600 Pro ideal for use in offices, homes and classrooms.
Servo motors with gear reduction
With closed loop control, position, speed and torque are matched for perfect accuracy. Thus, no step losses and associated shift displacements can occur. Heat and noise generation have also been significantly reduced.
Dual high-temp extruder up to 420°C
The D600 Pro 3D printer is equipped with two extruders and the unique 420°C hotend. The left 260°C hotend can print with materials such as PLA, ABS, PC, PA, carbon fiber, flexible and more. The right 420°C hotend is made of martensite steel and can print high-performance materials such as PEEK, ULTEM and other high-performance plastics. The hotends can be easily interchanged for even more options.
Outage Restored & Filament Detection
Should a power failure occur, the 3D printer automatically remembers the current position and saves the print data.
When the printer is turned back on, printing resumes at the last stopped location. In addition, it prevents unnecessary incorrect printing by stopping the printing process and warning when the filament runs out.
Touchscreen with English menu navigation, which is very easy to operate and user-friendly at the same time. Furthermore, the system is equipped with numerous useful functions.
Printing plate with BuiltTak coating
The print bed can be heated up to 100°C, allowing a wide range of materials to adhere. In addition, the printing plate is coated with a BuildTak printing film, this again ensures better adhesion and easier release of the objects after printing.
CreatWare printing software
The license-free slicing software CreatWare is included and is based on the Cura engine. This makes it easy to use.
Due to the advanced extruder feeding system, which supports high speed printing, accuracies of up to 0.05 can be achieved.
Precision up to: 0.05 mm
Speed up to: 200 mm/s